Aqua-win Reverse Osmosis Water supply purification Systems,water treatment equipment


PH Water Tester


Model No.
 C-275-2
Description
 PH600 Water Tester
Specification
This is a simple but very reliable tester that measures the (PH) in water.
Use of : water treatment, aquiculture, an aquatic farm,agriculture ,laboratory, food, garden, sewage treatment, swimming pool, industry.
Determine Scope: 0.0-14.0pH
Dpi: 0.1pH
Accurate: ±0.2pH
Check: by hands
Battery Value: 3x1.4V/700 hours

 

CD 97 Total Dissolved Solid Tester (TDS)


Model No.
 C-275-3
Description
 CD 97 Total Dissolved Solid Tester (TDS)
Specification
• Quick and accurate TDS readings
• Pocket-sized
The CD97 testers are reliable, pocket sized instruments that will give you quick and accurate readings of TDS.
This popular line of Dissolved Solids Testers has been redesigned to offer a host of improvements.
The casing has been engineered to allow air bubbles to escape.
If calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the easily accessible trimmer on the side of the tester.
Range: 0 ~ 999 ppm
Resolution: 1 ppm
Accuracy: ± 10ppm
Calibration: Manual 1 point through trimmer
Temperature compensation: Auto 5 ~ 50°C
Battery type / Life: 4 x 1.4V / 350 hours approx. continuous use

 

Total Dissolved Solid Tester


Model No.
 C-275
Description
 Total Dissolved Solid Tester (TDS)
Specification
This is a simple but very reliable tester that measures the Total Dissolved Solids (TDS) in water.
It gives a reading in parts per million (ppm) of all the dissolved solids, good or bad.
TDS measurement is a very effective way to test you reverse osmosis unit's performance.
Highly efficient and accurate due to its advanced microprocessor technology.
THold Function: saves measurements for convenient reading and recording.
Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
Display: large and easy-to-read LCD screen.
Factory Calibrated: recalibration is not necessary, but can be done easily with a watch screwdriver. There's no need for messy solutions.
TDS-3 range is 0-9990 with a resolution of 1 PPM.
TDS-2 range is 0-9990 with a resolution of 10 PPM.

 

Electronic Color Tester


Model No.
 C-278
Description
 Electronic Color Tester
Specification
Show the different color between R/O Pure Water and Tap Water.
Color Tester: Show the color of Water quality.
Results: R/O Water show only a little yellow & clear.
------------ Tap Water (city water) show black & dirty.
Degree of Accuracy: +2% Full Scale
Standard EMC Deviation: +2% Full Scale
Working Temperature: Automatic from 5oC ~ 50oC
Size: (L)150 x (W)30 x (H)24 mm
Weight: 85 g
Voltage: 110 / 220 VAC


RO Units
Water Ionizer
Water Treatment
Storage Tanks
RO Water Dispenser
UVC Lighting
Filters
Filter Housings
Water Tester
Components


Aqua-win Watertec Co.,Ltd.
TEL: 886-7-389-1628 FAX: 886-7-387-7085